ENVIRONMENTAL SAMPLING EQUIPMENT

Solinst Model 410 Peristaltic Pump
Solinst Model 410 Peristaltic Pump

Solinst Model 410 Peristaltic Pump

Peristaltic Pump Design

The Solinst Peristaltic Pump features a clear pump head that allows quick, convenient inspection of the pump head tubing before and during operation. The pump head cover is easy to remove for cleaning or replacing the tubing. The pump head tubing guides are designed to keep the tubing in place during sampling, no extra tubing clamps required.

Power Source & Motor

A 12 ft. (4 m) power cord uses alligator clips to connect to almost any 12 volt DC power source that can supply at least 3–5 amps at maximum draw (such as auto, marine or small gel cell battery). The pump may be connected directly to your vehicle battery.
The variable speed motor is reversible, has an easy-to-reset circuit breaker (no fuse to replace), and has reverse polarity protection to prevent damage to the pump.

Pump Tubing

The standard pump tubing is 5/8" OD (16 mm) medical grade silicone, which attaches easily to 1/2" OD (13 mm) downhole tubing. An adaptor kit, which allows the use of 3/8" OD (10 mm) tubing, provides lower sampling rates. This tubing attaches easily to 1/4" OD (6 mm) down-hole tubing.
To provide high sample integrity, the sample comes in contact only with the tubing. Replacing the tubing between locations avoids the possibility of cross-contamination. To reduce lengthy decontamination procedures, simply dedicate the inexpensive down-hole tubing.

Specifications

Sampling Depth: As much as 33 ft (10 m) at sea level
5/8" Tubing Sampling Rate 120 ml/min to 3.5 L/min
3/8" Tubing Sampling Rate: 40 ml/min to 900 ml/min
Pump Size: 13" x 5" x 6-1/2" (33 cm x 13 cm x 17 cm)
Pump Weight: 7.2 lbs (3.3 kg)
Power Source: 12 volt DC
Power Draw: 3–5 amps max.

Regular price$1,146.00
/