The AreaRAE Pro is Honeywell RAE Systems' transportable wireless area monitor — built to watch a location rather than a person. One unit tracks toxic and combustible gases, volatile organic compounds, gamma radiation and weather conditions simultaneously, then streams those readings back to a safe distance over Wi-Fi or mesh radio.

Because it reports wind speed and direction alongside gas concentration, the AreaRAE Pro suits work where you need to know not just that a release happened, but which way the plume is travelling.

Typical applications

• Hazmat and emergency response staging
• Fence-line and perimeter monitoring at plants and remediation sites
• Maintenance turnarounds and plant shutdowns
• Public venue and special-event air surveillance
• Site clearance and confined-space support

Key specifications

• Up to 7 gas sensor slots — six 4R+ sensors selectable from roughly 20 toxic and combustible options
• Gamma radiation sensor fitted on this configuration
• Optional RAEMet sensor: wind speed 0–20 m/s, 360° wind direction, temperature −20 to 60 °C, humidity 10–95% RH
• GPS fitted as standard
• 7.2 V / 10 Ah rechargeable Li-ion pack with built-in charger — approximately 16 hours with wireless active
• 240 × 320 pixel backlit LCD, 2.5" × 3.33"
• 108 dB multi-tone alarm at 1 m, plus 360° LED beacon
• Wireless range up to 330 ft (100 m) Wi-Fi; up to 650 ft (200 m) on the secondary mesh radio
• Datalog interval configurable from 1 to 3,600 seconds
• 12.36" × 12.04" × 6.53" with rubber boot; 13.88 lb fully optioned

Please note: this configuration (W01-0901-GEN, US) is supplied as a base unit with the gamma radiation sensor. The 4R+ gas sensors are selected separately to match your target compounds — contact our team and we will build the sensor set with you.

Technical Specifications

Manual

Parts, Accessories & Consumables

Sensors and PID lamps are consumables with a finite service life, and calibration gas should be replaced before its expiry date to keep readings accurate and defensible.

• Replacement Gas Sensors
• Calibration Gas Cylinders
• Calibration Gas Regulators
• Calibration & Bump-Test Accessories
• Pumps, Filters & Water Traps
• Sampling Hoses & Probes

AreaRAE 2 specific items — RAEMet wind and weather sensor kits, wind sensor kit with holder, Pelican transport cases, tripod stand, VOC zeroing tube kits, spare rubber boot kits and the AreaRAE calibration kit — are also available. Ask us for a quote.

Browse all RaeSystems Parts & Accessories →