ENVIRONMENTAL SAMPLING EQUIPMENT

Geotech GeoSub 2 hand reel with the GeoSub 2 stainless submersible pump and controller in its carry case

Geotech GeoSub 2 GeoReels

CE-marked GeoReels for the Geotech GeoSub 2 submersible pump. The reel carries the pump's motor lead so deploying and recovering the pump is a single controlled operation rather than a tangle of cable on the ground.

Two reel styles

  • Hand Reel — the compact, lower-cost option. Supplied with the motor lead and a 3/8" hose barb discharge fitting. Discharge tubing is not included — add a 3/8" ID tubing roll below in the material your program requires.
  • Small Portable Reel — a self-contained portable reel supplied complete with discharge tubing already fitted. Choose the tubing material to match your analyte list.

3/8" ID discharge tubing for the Hand Reel

Any of these fit the 3/8" hose barb:

Choosing a tubing material (Portable Reel)

  • Polyethylene — the economical standard for routine purging and general groundwater work.
  • FEP Lined PE — an inert fluoropolymer flow path with a polyethylene outer wall. Use where the analyte list rules out direct contact with polyethylene, at a lower cost than full FEP.
  • FEP — fully inert fluoropolymer throughout. The reference material for VOCs, SVOCs and low-level organics.
  • PVC Nylobraid — braided-reinforced PVC for higher pressure and rougher handling where chemical inertness is less critical.

Also required

Every GeoSub 2 reel needs the 15 ft extension cord (51201004) to carry power from the controller to the reel. It is included in the Pump & Controller Kit — add it here if you are building a system from separate components.

Related products

Need a length or material not listed? Contact us.


Regular price$2,640.00
/