ENVIRONMENTAL SAMPLING EQUIPMENT

Geotech Variable Frequency Drive controller for Rediflo2 submersible pump
Geotech Redi-Flo2 System with VFD, extension cord, Redi-flo2 (formerly Grundfos)electric submersible pump, and GeoReel for groundwater sampling.
Geotech Variable Frequency Drive controller for Rediflo2 submersible pump
Geotech Redi-Flo2 System with VFD, extension cord, Redi-flo2 (formerly Grundfos)electric submersible pump, and GeoReel for groundwater sampling.

Variable Frequency Drive

The Geotech Variable Frequency Drive is required to run the RediFlo2 (MP1) Pump. It sets discharge rate with a turn of a knob — from 8 GPM (30 LPM) down to 100 mL/min — for accurate low-flow sampling at any depth, and protects the pump against over- and under-voltage, over-current and ground fault.

Supplied in a case. Choose 115 V or 230 V input to match your supply.

The 15 ft extension cord is required to connect the VFD to the reel. That, the pump, GeoReels, discharge tubing, cooling shroud and every replacement part are in Redi-Flo2 (MP1) Parts & Accessories.

  • Precise Flow Control - Turn the knob or use the push button control for greater control over the discharge flow rate for better accuracy and precision during sampling.
  • Wide Performance Range - Not just one performance curve, the Geotech VFD covers a range of performances and can function at any point of operation within that range.
  • Either 120V or 230V, single-phase AC input power is available.
  • The NEMA 4x enclosure is designed for outdoor duty and is resistant to damage as a result of incidental exposure to rain. Designed for wash-down applications.
  • The Geotech VFD V/Hz pattern is specially optimized to allow the most efficient operation of the Redi-Flo2® variable performance pump.
  • The Geotech VFD will protect the Redi-Flo2® Variable Performance Pump from adverse motor conditions such as, over- and under-voltage, over-current, and groundfault.
  • Required with the Geotech RediFlo2 Pump
$2,480.00
/