Geotech Geopump Series II Peristaltic Pump
The Geotech Geopump™ Series II is a portable peristaltic sampling pump for shallow groundwater and surface water. The sample touches nothing but the inside of the tubing, so there is no pump body to decontaminate between wells — you change the tube and move to the next location. Series II carries two pumping stations: the first runs 30–300 RPM, the second 60–600 RPM, and either can be piggybacked for multi-station work. It lifts from up to 29 feet (8.8 m) at sea level and runs on 12–18 V DC in the field or 90–260 V AC on the bench.
Building your Geopump
Every Series II part number is assembled from three choices. Pick one from each group in the options above.
- Power & cords — DC only with a hardwired DC cord, or AC/DC with an interchangeable AC cord, DC cord, or both. The AC cord is 8 ft (2.4 m); the DC cord is 15 ft (4.6 m).
- Field case — none, a hard case with cut foam inserts, or that case with a 12 V battery and charger. The battery module is DC, so it is not offered on the AC-cord-only build.
- Pump head — none, Standard, Geoload, or Easy-Load® II. Every head ships with 5 feet of size 15 silicone tubing.
Pump head options
- Standard — tube sizes #15, #24
- Geoload — tube sizes #15, #24, #35, #36
- Easy-Load® II, performance — tube sizes #15, #24, #35, #36
- Easy-Load® II, precision — tube sizes #13, #14, #16, #17, #18, #25, #26
A short-shaft version of each head is available for stacking; stacking requires additional mounting hardware.
Tubing
The Geopump runs on silicone tubing in the pump head and polyethylene tubing on the intake and discharge lines. Tygon is not compatible with this pump — use silicone for the pump head.
- Silicone Pump Head Tubing — the flexible tube that sits in the pump head
- Low-Density Polyethylene (LDPE) Tubing and High-Density Polyethylene (HDPE) Tubing — intake and discharge lines
Parts & Accessories
- Geopump Repair Parts — gear housings, motor, rheostat, switches, power cords, batteries and hardware for Series I and Series II
- All Geopump Parts & Accessories
- Two pumping stations - station 1 at 30 to 300 RPM and station 2 at 60 to 600 RPM, piggyback capable for multi-station pumping
- Sample contacts only the tubing, so no pump component needs decontamination between sampling points
- Reversible flow lets you back-flush a plugged intake line without pulling the tubing
- Stepless variable speed control for precise low-flow rates
- Runs on 12 to 18 V DC at 70 W in the field or 90 to 260 V AC 47 to 65 Hz on the bench
- Cold-rolled steel pump head rotor and 29 ft (8.8 m) suction lift at sea level
- Low-flow / micro-purge groundwater sampling
- Purge and sample of shallow monitoring wells
- In-line filtration for dissolved metals
- Surface water and discrete-depth sampling
- Multi-station sampling from two pumping stations
- Laboratory and bench fluid transfer