0item(s)

You have no items in your shopping cart.

Water Level & Interface Meters

Product was successfully added to your shopping cart.

Water Level & Interface Meters

Set Descending Direction

   

Items 1 to 10 of 17 total

  1. 1
  2. 2
  1. Solinst Model 101 Water Level Meter

    For measuring the depth to water in wells, boreholes, standpipes, and tanks, Model 101 Water Level Meters are the industry standard for portable hand operated meters. They are sturdy, easy to use and read accurately to 1/100 ft. or each millimeter

    There are two versions to choose from. The Model 101 P7 Water Level Meter features a pressure-proof probe rated to 500 psi and laser marked PVDF tape. The Model 101 P2 Water Level Meter features an easy-to-repair probe and heat embossed polyethylene tape.

  2. Heron dipper-T2

    The dipper-T2 water level meter is designed for well drillers, consultants, and hydrogeologists all across the globe.

    The dipper-T2 is a rugged and dependable water level meter made from high quality materials, easy to use for a wide variety of applications. The dipper-T2 is capable of measuring both static and falling head levels. Static mode is used for measuring the depth of water in wells, boreholes and standpipes. DrawDown mode is used for measuring falling water levels during purging, well development and for low flow sampling; helping to protect your pump from damage caused by dry running.

  3. Heron dipper-T Four Function Water Level Meter

    The Heron dipper-T is renowned for its premium, polyethylene coated yellow steel tape accuracy in measuring depth to water. Available in your choice of either metric or engineering scale.

    The dipper-T water level meter can be conveniently converted to a multi-functional instrument, not only able to measure static and falling head levels, but also to determine the length of casing and well depth.

    The dipper-T is available as kits:

    • dipper-T with Well Depth & Well Casing Indicator Probes
    • dipper-T with Well Depth Indicator Probe
    • dipper-T with Well Casing Indicator Probe
  4. Heron Little Dipper2

    The little dipper2 is a compact water level meter designed for ease of portability, used to measure both static and falling head levels in wells and boreholes. A padded carry case comes included, but it’s small enough to be stowed in a backpack.

    The little dipper2 is available in three lengths: 15m or 50ft, 30m or 100ft to the standard 22m or 75ft. With these additional lengths, the little dipper2 is able to reach new depths, while still maintaining the compact size!

    The little dipper2 in static mode is used for measuring the depth of water. The little dipper2 in drawDown mode may be used for measuring falling water levels during purging, well development and for low flow sampling; helping to protect your pumps from damage caused by dry running.

  5. Solinst Laser Marked Model 102 Water Level Meter

    Designed to accurately measure groundwater levels in small diameter applications. P4  is a 0.157" x 1.5" long standard probe with no weights. P10 3/8" x 1.5" beaded probe with 10 stainless steel weights (see picture).
  6. Heron H.OIL Interface Meter

    The H.OIL oil, water interface meter is used to measure the interface level between two liquids in the same tank, vessel, well or aquifer. The dissimilar density of two liquids means the lower density, non-conductive product (LNAPL) will float on top of the higher density, conductive liquid (water). Denser products will tend to sink (DNAPL), creating a layer under the water. The premium padded carry case comes included to protect your precision instrument from the elements.

    The hydrocarbon resistant Kynar jacketed, high tensile steel core tape is able to withstand hydrocarbons, solvents and other harsh contaminants. The CSA intrinsically safe certification makes the H.OIL ideal for use in hazardous environments by Oil & Gas, Chemical and Petrochemical Industries.

  7. Heron Skinny Dipper Water Level Meter

    This rugged unit is intended for use in narrow tubes and piezometers. The tape on the skinny dipper is a narrow 0.24 inch x 0.133 inch (6.2 mm x 3.4 mm). The probe is 0.25 inch (6.25mm) diameter stainless steel. This thin section enables the skinny dipper to be used in tubes as narrow as 0.375 inch (9.5mm) internal diameter.

    The high strength tape has two embedded stainless steel conductors. The graduations are printed under the polyethylene coating in feet x 0.01 ft (not available in metric) giving precision and durability.

    The skinny dipper includes a fully potted, fully removable electronic module. The super bright red LED and buzzer are housed inside this water tight module. The sensitivity dial on the Skinny dipper allows false signals from cascading water to be tuned out, enabling the most accurate readings possible.

  8. Solinst Laser Marked Model 102M Mini Water Level Meter

    The 102M Mini Water Level Indicator is a compact meter in 80 ft and 25 m lengths. The reel is light-weight and fits easily into a backpack or a mini carrying case. The cable is marked every 1/100 ft or each millimeter, with a choice of a P4 or P10 Probe.

  9. Solinst Mini 122 Interface Meter

    The 122M Mini Interface Meter is a more portable version of the 122 Interface Meter. It is small enough to fit in a backpack, yet rugged and reliable. It comes with PVDF cable in 80 ft or 25 m lengths. It shares the same probe, and certifications as the 122 Interface Meter.
  10. Heron Sm.OIL Interface Meter

    The Sm.OIL oil/water interface meter has the same functionality of the H.OIL oil/water interface meter. This compact unit only comes in one tape length (20m or 60’) on a small hand held frame designed for easy portability. The premium padded carry case comes included to protect your precision instrument from the elements.

    The Sm.OIL is used to measure the interface level between two liquids in the same tank, vessel, well or aquifer. The dissimilar density of two liquids means the lower density, non-conductive product (LNAPL) will float on top of the higher density, conductive liquid (water). Denser products will tend to sink (DNAPL), creating a layer under the water.

    The hydrocarbon resistant Kynar jacketed, high tensile steel core tape is able to withstand hydrocarbons, solvents and other harsh contaminants. The CSA intrinsically safe certification makes the Sm.OIL ideal for use in hazardous environments by Oil & Gas, Chemical and Petrochemical Industries.

    $839.00
Set Descending Direction

   

Items 1 to 10 of 17 total

  1. 1
  2. 2