Solinst Model 410 Peristaltic Pump
Peristaltic Pump Design
The Solinst Peristaltic Pump features a clear pump head that allows quick, convenient inspection of the pump head tubing before and during operation. The pump head cover is easy to remove for cleaning or replacing the tubing. The pump head tubing guides are designed to keep the tubing in place during sampling, no extra tubing clamps required.
Power Source & Motor
A 12 ft. (4 m) power cord uses alligator clips to connect to
almost any 12 volt DC power source that can supply at least
3–5 amps at maximum draw (such as auto, marine or small
gel cell battery). The pump may be connected directly to your
vehicle battery.
The variable speed motor is reversible, has an easy-to-reset
circuit breaker (no fuse to replace), and has reverse polarity
protection to prevent damage to the pump.
Pump Tubing
The standard pump tubing is 5/8" OD (16 mm) medical grade
silicone, which attaches easily to 1/2" OD (13 mm) downhole
tubing. An adaptor kit, which allows the use of 3/8" OD
(10 mm) tubing, provides lower sampling rates. This tubing
attaches easily to 1/4" OD (6 mm) down-hole tubing.
To provide high sample integrity, the sample comes in contact
only with the tubing. Replacing the tubing between locations
avoids the possibility of cross-contamination. To reduce lengthy
decontamination procedures, simply dedicate the inexpensive
down-hole tubing.
Specifications
Sampling Depth: | As much as 33 ft (10 m) at sea level |
---|---|
5/8" Tubing Sampling Rate | 120 ml/min to 3.5 L/min |
3/8" Tubing Sampling Rate: | 40 ml/min to 900 ml/min |
Pump Size: | 13" x 5" x 6-1/2" (33 cm x 13 cm x 17 cm) |
Pump Weight: | 7.2 lbs (3.3 kg) |
Power Source: | 12 volt DC |
Power Draw: | 3–5 amps max. |