Renting instrumentation requires forethought regarding calibration, timing and shipping. Below is a selection of some of the equipment we can rent. Please call us so your order can be processed efficiently. We look forward to discussing your needs.
TERMS: The rental period begins when equipment arrives at a client's designated location and continues until the return of the equipment to Enviro-Tech. If the equipment is picked up at Enviro-Tech, the rental period begins on that day and continues until the equipment is returned to Enviro-Tech unless other arrangements are made with Enviro-Tech.
SHIPPING and TAXES: All equipment is shipped prepaid, FOB Martinez, CA. The shipping charges will be added to your invoice. The client is also responsible for any and all return shipping costs and for the payment of any Federal, State or Local taxes.
FINANCIAL RESPONSIBILITY: The client assumes all financial responsibility for the loss of any rental equipment obtained through Enviro-Tech. The client is also financially responsible for any and all repairs to rental equipment due to misuse, abuse, or accidental damage. The client also agrees to inspect all rental equipment upon receipt. Should rental equipment fail to operate correctly, or is damaged upon receipt, the client shall notify Enviro-Tech within 24 hours of receipt of equipment in order to remedy the situation.
USE OF EQUIPMENT: The client shall use rental equipment in accordance with all laws and other governmental requirements and the manufacturer's instructions and specifications. The client shall keep the rental equipment free from all liens and encumbrances. The client shall not assign or sublet equipment or allow any alterations, modifications or repairs of any rental equipment by anyone other than Enviro-Tech without prior written consent of Enviro-Tech. All rental equipment is cleaned and calibrated prior to shipment from Enviro-Tech. It is the client's sole responsibility that the integrity of the calibration has been maintained during transit and is in accordance with any work plans or specifications. The client shall bear the entire risk of loss or damage to the equipment from any cause, and shall indemnify and hold Enviro-Tech harmless from any and all litigation, losses, costs and expenses arising out of use, possession, operation or renting of equipment.
RETURN OF EQUIPMENT: Upon completion of use, the client shall return the equipment to Enviro-Tech, Martinez, CA, in substantially the same condition that it was first received. In cases where the instrument is exposed to or coated with toxic chemicals, it is mandatory that Enviro-Tech be notified of the contaminating materials that may be present, and it is the client's responsibility to decontaminate the equipment. Failure to do so will result in additional service charges. The client shall be responsible for any repairs or service necessary to restore damaged equipment including parts and labor. The client shall also be responsible for replacement of any lost or damaged accessories and manuals. The client shall properly pack the equipment for return shipment and shall be responsible for loss or damage caused during the return shipment.
PAYMENT TERMS: All rental invoices are marked NET 30 days. Any rental invoices not paid in full by the due date will be subject to a 1.75% late charge. Clients that do not currently have an account with Enviro-Tech are subject to pay the rental fee in advance by cash, check or credit card. You may also submit a credit application to open up an account.
LIABILITY: In no event will Enviro-Tech be liable for any consequential, incidental, or exemplary damages, including, but not limited to, any loss of profit or revenues, loss of use of any equipment, damage to other equipment, cost of substitute equipment or downtime costs. Enviro-Tech shall not be responsible for loss or damage to a clients business, property, or for injury or death to persons. The client shall indemnify Enviro-Tech and hold it harmless from any claims for any of the foregoing, including associated legal fees and expenses.
AGREEMENT: The above listed terms and conditions are the only terms and conditions under which Enviro-Tech will rent equipment. This agreement may not be altered or modified except in writing and signed by an authorized representative of Enviro-Tech. If any provision in this agreement is held to be invalid or unenforceable, such holding shall not be deemed to render any other provision hereof invalid or unenforceable.
A copy of these terms and conditions is provided with each piece of rental equipment. Upon acceptance of equipment, the client accepts and agrees to these terms and conditions.
2 stage clutch and e-clutch for maximum control in bind-up situations SHOCKS- Active vibration control reduces vibration felt by the user at the handles 15.5 joules of impact energy provides maximum performance in drilling and chipping 15 amp motor provides maximum overload protection and power Electronic variable speed allows the user to control the speed of drilling and chipping while maintaining speed under load Rear handle mount means less bending over when using tool in down drilling applications Trigger lock on reduces user fatigue while chipping, only available in chipping mode Electronic sort start provides the user more control when the trigger is pulledDaily: $60 | Weekly: $180 | Monthly: $540
AMS GVP kits use an AMS slide hammer or an electric rotary drive hammer and GVP drive extensions to insert a stainless steel GVP tip to the desired sampling depth. Fluoropolymer tubing is attached to a barb fitting on the GVP tip for remote sampling from the surface. Two GVP tips are available for use with AMS GVP kits – dedicated gas vapor tips, and the AMS Retract-A-Tip.Daily: $220 | Weekly: $660 | Monthly: $1980
The GEM™2000 and GEM™2000 Plus, designed by LANDTEC, are specifically for use on landfills to monitor landfill gas (LFG) extraction systems, flares and migration control systems. Both instruments sample and analyze the Methane, Carbon Dioxide and Oxygen content of LFG. The GEM™2000 Plus also samples and analyzes Carbon Monoxide and Hydrogen Sulfide. The GEM instruments are not total hydrocarbon analyzers. The readings are displayed and can be stored in the instrument or downloaded to a personal computer for reporting, analyzing and archiving.Daily: $170 | Weekly: $510 | Monthly: $1530
The GasCheck G gas leak detector represents the latest in gas detection technology. Its advanced system of micro thermal conductivity enables advanced sensitivity for the rapid, effective detection of gas leaks down to cc/sec, mg/m³ or ppm levels.
Designed for the search and location of gas leaks, the GasCheck G leak detector provides you with effective detection of almost any gas or gas mixture. Robust and reliable, the GasCheck G leak detector gives stable, repeatable readings of the detected gas.Daily: $140 | Weekly: $420 | Monthly: $1260
The YSI ProODO handheld dissolved oxygen meter provides extreme durability for measuring DO with optical, luminescent based technology for field or lab. Available sensors are EPA approved for wastewater compliance reporting of BOD, CBOD, and DO.Daily: $70 | Weekly: $210 | Monthly: $630
Equipped with features that are not available on competitive units, the EAGLE 2 is a powerful instrument that does more than just offer the standard confined space protection for LEL, O2, H2S and CO. Detection combinations never before offered in a portable gas monitor are now available featuring the industry’s widest selection of high quality, long life and field proven sensors. The EAGLE 2 now includes PID (Photo Ionization Detector) capability. Conversion factors for a variety of common gases are programmed into the EAGLE 2 for both the PID sensor and LEL/PPM catalytic sensor.
With its ergonomic design and large glove friendly buttons, the EAGLE 2 offers easy access to controls such as autocalibration, alarm silence, demand zero, peak hold, methane elimination, and a wide variety of other features. Each channel has two alarm levels plus TWA and STEL alarms for toxic channels. The two alarm levels are user adjustable and can be latching or self resetting. Rugged, reliable, easy to operate and maintain, the EAGLE 2 is the solution for just about any portable gas monitoring situation. Also, the display can be set to one of 5 languages: English, French, German, Italian, or Spanish.
This instrument is configured for LEL/O2/H2S/CO/VOC's(0-2000ppm)Daily: $105 | Weekly: $315 | Monthly: $945
TSI's Model 9545-A VELOCICALC Air Velocity Meter measures velocity, humidity and temperature. With a few simple keystrokes it calculates flow rate, performs multi-value averaging, and determines minimum and maximum readings.Daily: $60 | Weekly: $180 | Monthly: $540
The Solinst Model 101 Flat Tape Water Level Meter is recognized as the industry standard for quality and reliability in water level measurement devices.Daily: $40 | Weekly: $105 | Monthly: $315